Control Research Inc Homepage
This text is replaced by the Flash movie.
Home Products About CRI Demos & Specials Dealers Manuals & Parts Contact Us Bookmark

Rolloscope Manuals & Parts

Rolloscope Models: M and ML Item Numbers and Descriptions

TECHNICAL MANUAL - Rolloscope M and ML - Motorized Mammography Viewers

PART NUMBER  
DESCRIPTION   M   ML   COMMENTS  
Bearings
Bearing, Pillow Block, 2-13/64" C-C mount   S-121-01-016-a   S-121-01-016-a   Includes pillow block and bearing  
Bearing, Pillow Block 2" C-C mount   S-121-01-016-b   S-121-01-016-b   Includes pillow block and bearing  
Bearing for Idler   S121-01-058   S-121-01-058   Includes a two-piece housing  
Line Connection Components
Plug, 120 V, 15 A Hospital Grade, Right Angle   S-121-01-035   S-121-01-035   Used where line voltage is 120 V  
Plug, 220 V   S-121-01-049   S-121-01-049   Used where line voltage is 220 V  
Line Cord, 3 x 16 AWG, 14.5 ft   S-121-01-034   S-121-01-034  
Line Filter, 10 A   S-121-01-307   S-121-01-307  
Switch, Power, 220 V   S-121-01-308   S-121-01-308   Used where line voltage is 220 V  
Switch, Power, 120 V   S-121-01-306   S-121-01-306   Used where line voltage is 120 V  
Transformer T1, 120/240 V   S-121-01-002   S-121-01-002  
Shutter Drive Components
Step Motor, Left-Right Shutter   S-121-02-027   S-121-02-027  
Step Motor, Upper-lower Shutter   S-121-02-026   S-121-02-026  
Pulley, 10 Teeth, 1/4" Bore   S-121-02-042   S-121-02-042  
Belt, closed , XL110 (55 teeth)   S-121-02-033   S-121-02-033  
Belt, open, XL, steel reinforced   S-121-02-032   S-121-02-032   Specify Length  
Transport Band Control Components
Magnetic Sensor   S-121-01-015   S-121-01-015  
Frequency/Voltage Converter   S-121-01-029   S-121-01-029  
Gear Tooth Sensor   S-121-01-028   S-121-01-028  
Photo Sensor Set   S-121-01-031   S-121-01-031   Includes both Emitter and Receiver  
DC Gear Motor   S-121-01-027   S-121-01-027  
Anti-Static Brush   S-121-27-002   S-121-27-002   * ML Quantity is 6  
Transport Band Components
Transport Band Assy. Complete   A-121-03-001   A-150-03-001   NOTE: For installation of this item, please contact Control Research, Inc.  
Label 3/4" x 3/4", for Stop Point   S-121-03-007   S-121-03-007  
String with Adhesive Tabs, white   S-121-03-016   S-150-03-016  
String with Adhesive Tabs, clear   S-121-03-018   S-150-03-018  
Fasteners, Push-on, Nylon   S-121-03-003   S-121-03-003   * 1602 used in ML  
Film Holding Clip   S-121-03-002   S-148-03-002   Rev.0: Clear (for #101-107 only) Rev.1: Clear with black center strip  
Black Label for End Stops   Use 4 of Item 1  
Steel Shim, 0.75 x 1 x 0.03"   S-121-03-008   S-121-03-008   Used for end stops by magnetic sensors  
Label Set, Numbers 0 to 85   S-121-03-006   S-121-03-006  
Support, Backing Strip for Film Clip   S-121-03-004   S-148-03-004 Specify Rev. #   Rev.0: Gray, 1.300" wide Rev.1: Gray, 0.875" wide Rev.2: Clear, 0.875 wide  
Auxiliary Panel
Socket Connector   S-121-01-024   S-121-01-024  
Optional Foot Switch for   A-121-22-001   A-121-22-001  
Transport band, Complete  
Control Panel
Control Panel Assembly   A-121-16-001   A-121-16-001   Includes items 2-10  
Flexible Cable Assembly   S-121-16-013   S-121-16-013  
Rotary Encoder   S-121-16-010   S-121-16-010  
Knob for Frame Selector   S-121-16-007   S-121-16-007  
Frame Selector Board, without CPU Board   S-121-16-005   S-121-16-005  
CPU Board, for Frame Selector Board   S-121-16-014   S-121-16-014  
Battery, Lithium 3V   S-121-16-021   S-121-16-021   Type BR2325, Tab Mount  
Shutter Switch Board   S-121-16-006   S-121-16-006  
Knob for Dimmer   S-121-16-008   S-121-16-008  
Shutter Joy Stick   S-121-16-009   S-121-16-009  
Electronic Chassis Assembly
Shutter Control Board without CPU Board   S-121-13-006   S-121-13-006  
CPU Board for Shutter Control Board   S-121-13-018   S-121-13-018  
Battery, Lithium 3V   S-121-13-021   S-121-13-021   Type BR2325  
Step Motor Driver   S-121-13-003   S-121-13-003  
Relay Interface Board   S-121-13-004   S-121-13-004  
Power Supply Board   S-121-13-005   S-121-13-005  
DC Motor Drive Board   S-121-13-007   S-121-13-007  
Relay DPDT, 24 V   S-121-13-008   S-121-13-008  
Relay Socket   S-121-13-009   S-121-13-009  
Hold Down Spring for Relay   S-121-13-010   S-121-13-010  
Illuminator
Shutter Shield, Acrylic Clear   S-121-02-034   S-150-02-034  
Lamp, Fluorescent   S-121-02-067   S-150-02-067  
Diffuser, Acrylic   S-121-01-005   S-150-01-005  
Ballast, Dimming   S-121-02-066   S-150-02-066  
Lamp Holder, with metal spring   S-121-02-037   S-121-02-037  
Cabinet
Side Cover   S-121-09-010   S-121-09-009  
Caster, 3"Wheels w. Circaxle   S-121-01-026   S-121-01-026  
Front Cover   S-121-09-011   S-148-09-011  
Table Assembly   A-121-10-001   A-150-10-001   Complete with brackets  
Back Cover   S-121-09-009   S-150-09-009  
Cover for Electronics   S-121-09-017   S-150-09-017  
Top Cover   S-121-09-012   S-148-09-012  


Rolloscope Models: MD and MP Item Numbers and Descriptions

TECHNICAL MANUAL - Rolloscope MD and MP - Motorized Mammography and Multipurpose Viewers
Bearings
 Bearing, Pillow Block, 2-13/64" C-C mount    S-121-01-016-a    S-121-01-016-a    Includes pillow block and bearing  
 Bearing, Pillow Block 2" C-C mount    S-121-01-016-b    S-121-01-016-b    Includes pillow block and bearing  
 Bearing for Idler    S121-01-058    S-121-01-058    Includes a two-piece housing  
Line Connection Components
 Plug, 120 V, 15 A Hospital Grade, Right Angle    S-121-01-035    S-121-01-035    Used where line voltage is 120 V  
 Plug, 220 V    S-121-01-049    S-121-01-049    Used where line voltage is 220 V  
 Line Cord, 3 x 16 AWG, 14.5 ft    S-121-01-034    S-121-01-034    
 Line Filter, 10 A    S-121-01-307    S-121-01-307    
 Switch, Power, 220 V    S-121-01-308    S-121-01-308    Used where line voltage is 220 V  
 Switch, Power, 120 V    S-121-01-306    S-121-01-306    Used where line voltage is 120 V  
 Transformer T1, 120/240 V    S-121-01-002    S-121-01-002    
Shutter Drive Components
 Step Motor, Left-Right Shutter    S-121-02-027    S-121-02-027    
 Step Motor, Upper-lower Shutter    S-121-02-026    S-121-02-026    
 Pulley, 10 Teeth, 1/4" Bore    S-121-02-042    S-121-02-042    
 Belt, closed , XL110 (55 teeth)    S-121-02-033    S-121-02-033    
 Belt, open, XL, steel reinforced    S-121-02-032    S-121-02-032    Specify Length  
Transport Band Components
 Transport Band Assy. Complete    A-121-03-001    A-150-03-001    NOTE: For installation of this item, please contact Control Research, Inc.  
 Label 3/4" x 3/4", for Stop Point    S-121-03-007    S-121-03-007    
 String with Adhesive Tabs, white    S-121-03-016    S-150-03-016    
 String with Adhesive Tabs, clear    S-121-03-018    S-150-03-018    
 Fasteners, Push-on, Nylon    S-121-03-003    S-121-03-003    * 1872 used in MP  
 Film Holding Clip    S-121-03-002    S-148-03-002    
 Black Label for End Stops        Use 4 of Item 1  
 Steel Shim, 0.75 x 1 x 0.03"    S-121-03-008    S-121-03-008    Used for end stops by magnetic sensors  
 Label Set, Numbers 0 to 100    S-148-03-006    S-148-03-006    
 Support, Backing Strip for Film Clip    S-121-03-004    S-148-03-004    
Transport Band Control Components
 Magnetic Sensor    S-121-01-015    S-121-01-015    
 Frequency/Voltage Converter    S-121-01-029    S-121-01-029    
 Gear Tooth Sensor    S-121-01-028    S-121-01-028    
 Photo Sensor Set    S-121-01-031    S-121-01-031    Includes both Emitter and Receiver  
 DC Gear Motor    S-121-01-027    S-121-01-027    
 Anti-Static Brush    S-121-27-002    S-121-27-002    * MP Quantity is 6  
Auxiliary Panel
 Socket Connector    S-121-01-024    S-121-01-024  
 Optional Foot Switch for    A-121-22-001    A-121-22-001  
 Transport band, Complete      
Control Panel
 Control Panel Assembly    A-151-16-001    A-148-16-001    Includes items 2-10  
 Flexible Cable Assembly    S-121-16-013    S-121-16-013    
 Rotary Encoder    S-121-16-010    S-121-16-010    
 Knob for Frame Selector    S-121-16-007    S-121-16-007    
 Frame Selector Board, without CPU Board    S-121-16-005    S-121-16-005    
 CPU Board, for Frame Selector Board    S-151-16-014    S-151-16-014    
 Battery, Lithium 3V    S-121-16-021    S-121-16-021    Type BR2325, Tab Mount  
 Shutter Switch Board    S-121-16-006    S-121-16-006    
 Knob for Dimmer    S-121-16-008    S-121-16-008    
 Shutter Joy Stick    S-121-16-009    S-121-16-009    
Electronic Chassis Assembly
 Shutter Control Board without CPU Board    S-121-13-006    S-121-13-006    
 CPU Board for Shutter Control Board    S-151-13-018    S-148-13-018    
 Battery, Lithium 3V    S-121-13-021    S-121-13-021    Type BR2325  
 Step Motor Driver    S-121-13-003    S-121-13-003    
 Relay Interface Board    S-121-13-004    S-121-13-004    
 Power Supply Board    S-121-13-005    S-121-13-005    
 DC Motor Drive Board    S-121-13-007    S-121-13-007    
 Relay DPDT, 24 V    S-121-13-008    S-121-13-008    
 Relay Socket    S-121-13-009    S-121-13-009    
 Hold Down Spring for Relay    S-121-13-010    S-121-13-010    
Illuminator
 Shutter Shield, Acrylic Clear    S-151-02-034    S-148-02-034  
 Lamp, Fluorescent    S-121-02-067    S-150-02-067  
 Diffuser, Acrylic    S-151-01-005    S-148-01-005  
 Ballast, Dimming    S-121-02-066    S-150-02-066  
 Lamp Holder, with metal spring    S-121-02-037    S-121-02-037  
Cabinet
 Side Cover    S-148-09-010    S-148-09-009    
 Caster, 3"Wheels w. Circaxle    S-121-01-026    S-121-01-026    
 Front Cover    S-121-09-011    S-148-09-011    
 Table Assembly    A-151-10-001    A-150-10-001    Complete with brackets  
 Back Cover    S-151-09-009    S-148-09-009    
 Cover for Electronics    S-121-09-017    S-150-09-017    
 Top Cover    S-121-09-012    S-148-09-012    


Rolloscope Model II: Item Numbers and Descriptions

Product/Service Description
  A-41-03-001 Guide roller assembly w. end bearings
  A-41-12-001 Hot Light Foot Switch Assembly
  A-41-15-001 Lower leader strap
  A-41-16-001 Upper leader strap
  A-41-19-001 Lamp Switch Control w. 8 mom. switches. Complete assy.
  A-41-19-001 R Lamp Switch Control w. 8 mom. switches. Complete assy. Rebuilt.
  A-41-22-001 Hand crank/wheel assembly
  A-41-34-002 Auto Frame Selector, complete w. front panel.
100 frame version
  A-41-34-002-50 Auto Frame Selector, complete w. front panel.
50 frame version. Use as replacement for old style 50 button selector.
  A-41-35-001 Lamp Control Assembly complete, 10 pushbuttons w. LED's & dimmer control. For Rolloscope II type 125-003 & 125-004
  A-41-37-001 Rolloscope II Transport Band Assembly,
50 frames. For use in types 125-001 through 125-003
  A-41-37-002 Transport Band Assembly for Rolloscope II,
100 frames. For use in type 125-004
  A-41-41-001 Table Assembly, complete for Rolloscope II
  A-41-41-002 Table Bracket Left
  A-41-41-003 Table Bracket Right
  A-41-41-004 Table top for Rolloscope II, without brackets
  S-41-01-002 Suction Cups for RSII
  S-41-01-005 Switch, Up-Down, for Rolloscope II
  S-41-01-006 Same as/ please refer to S-121-01-014 Switch, power, engraved ON-OFF
  S-41-01-008 Outlet, Duplex 110v, 115A, Leviton, or Hubbell 5242-1
  S-41-01-015 DC Drive Motor for Rolloscope II
  S-41-01-016 Capacitor for Torque Motor.
  S-41-01-017 Torque Motor for Rolloscope II
  S-41-01-022 Drive Belt for Rolloscope II
  S-41-01-031 Switch, Interlock
  S-41-01-032 Netting for Rolloscope II 50-frame versions, 115 ft. long
  S-41-01-033 Flanged bearing for 5/8" dia. shaft
  S-41-01-034 Flanged bearing for 3/4" dia. shaft
  S-41-01-038 Belt, polyurethane left side (long) for Rolloscope II, 50 frame version only
(125-001 through 125-003)
  S-41-01-038-L45 Belt, polyurethane left side (long) for Rolloscope II. Note: 45" long to duplicate loose fit on older Rolloscope versions.
  S-41-01-039 Belt, polyurethane right side (short) for Rolloscope II 50 frame and 100 frame versions
  S-41-01-134 Transformer T1 for Rolloscope II
  S-41-03-004 Spray Adhesive, For foam tubes RSII
  S-41-03-006 Tube, Foam, Armaflex 6' long
  S-41-05-010 Fluorescent lamp F 15 for Rolloscope II. Replace with L15: S-41-05-018
  S-41-05-011 Solid State Ballast for Rolloscope II w. four F15 lamps/box
  S-41-05-018 Fluorecent lamp L 15 for Rolloscope II 125-001
  S-41-08-004 Motor Speed Control for Rolloscope II
  S-41-08-012 Relay 125 VAC, CR 4-5-6-7 in Rolloscope II
  S-41-08-031 Relay 24 VAC, CR1-2-3-8 in Rolloscope II
  S-41-09-003 Clip, Film, Extruded
  S-41-09-004 Fastener, clear, pkg. of 100
  S-41-09-004A Fasteners, black. Pkg. of 100
For late model Rolloscope II with black film clips.
(Same as S-41-37-009)
  S-41-11-004 Bi-stable impulse relay,
24 VAC
  S-41-11-011 Diffuser panel for Rolloscope II
  S-41-11-032 Bi-stable impulse relay
24 VDC
  S-41-11-033 Rectifier for Rolloscope II
  S-41-19-004 Switch for Viewer Lamp Control panel mounted in table top (older Rolloscopes)
  S-41-19-101 Reset/Stop Switch W/LED for RSII frame selector
  S-41-19-102 Cap W/Clear Lens for Rest/Stop Switch on RSII frame selector
  S-41-22-003 Handle for handcrank wheel
  S-41-22-005 Urethane Belt for hand cranking Rolloscope II,
130"
  S-41-22-006 Urethane Belt for hand cranking Rolloscope II, 76"
  S-41-29-002 Circuit Breaker, Fuseholder Type, P&B # W28-XQ1A-3, 3A
  S-41-35-006 Same as/ please refer to S-121-16-008, Knob for Dimmer
  S-41-37-004 Wooden Dowel 7/16x48"
  S-41-37-005 Extruded Film Clip, R II
  S-41-37-006 Film Clip Support, flat
  S-41-37-009 Fastener, black, pkg. of 100
For late model RolloscopeII with black film clips
  S-41-40-003/Advance Advance Dimmable Ballast for Rolloscope II
  S-41-40-003/Motorola Motorola dimmable ballast for Rolloscope II
  S-41-40-005/S-41-40-021 Lamp P-line Osram Dulux L 36W/11-860 ( U-shape)
For model #125-003 & 125-004
  S-41-40-011 Relay, solid state for Rolloscope II type 125-003. Continental Industries RLDA-240/15-000. Orange (or blue-green) housing w. lugs for .250" Faston terminals.
Limited supply, no longer manufactured.
  S-41-40-011A Solid State Relay for Rolloscope II type 125-004 late production. Continental Industries SSDA-330-25-000. Green housing with screw terminals.
  S-41-42-005 Circuit Breaker
  S-41-42-007 Transformer, T-2 for Rolloscope II
  S-41-42-009 470uf 50v Capacitor
  S-41-43-004 Service switch for Rolloscope II
  S-41-46-001 Lamp Control PC board, complete. For Rolloscope II types 125-003 & 125-004
  S-41-46-009 Switch used on Lamp Control PC board (A-41-46-001) for Rolloscope II type 125-003 & 125-004
  S-41-46-010 Switch cap, latching, for Lamp Control Switches. For units with switch barriers (most common)
  S-41-46-011 Green LED for lamp control on Rolloscope II
  S-41-47-039 Belt, polyurethane, left side (long) for Rolloscope II 100 frame version (125-004) only.
  S-41-47-045 Belt, urethane, right side (short) for all Rolloscope II.Same as S-41-01-039
  S-41-47-060 Netting for Rolloscope II 100 frame versions, 180 feet long

What's the Control Research Difference?

Engineering for intuitive operation
concentrate on the case, not the equipment

Solid construction
long lasting investment in increased productivity

Equipment designed and assembled by people who genuinely care
we think the users will notice

Technical support second to none
practically eliminates equipment downtime

A small, friendly company
talk to human beings, not voice menus!